Gigabyte - BRIX GB-BRR3H-4300
-
Standard
4 GB (Removable)
8 GB (Removable)
-
Maximum
64 GB
-
4GB Standard:
4 GB -
8GB Standard:
4 GB4 GB
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 2.5-inch 7mm
USB 2.0/3.x Type-C
SSD - M.2 SATA
SSD - M.2 NVMe
-
2 Socket(s)
-
AMD Ryzen 3 4300U (N/A)
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
-
Part Number: KVR32S22D8/16
- Part Number: KVR32S22D8/16
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 2RX8 1.2V 260-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 2RX8 1.2V 260-pin 8Gbit
-
Part Number: KVR32S22D8/32
- Part Number: KVR32S22D8/32
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 2RX8 1.2V 260-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 2RX8 1.2V 260-pin 16Gbit
-
Part Number: KVR32S22S6/4
- Part Number: KVR32S22S6/4
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KVR32S22S6/8
- Part Number: KVR32S22S6/8
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX16 1.2V 260-pin 16Gbit
-
Part Number: KVR32S22S8/16
- Part Number: KVR32S22S8/16
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 16Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 16Gbit
-
Part Number: KVR32S22S8/8
- Part Number: KVR32S22S8/8
- DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered SODIMM CL22 1RX8 1.2V 260-pin 8Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/1000G
- Part Number: SFYRS/1000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRSK/1000G
- Part Number: SFYRSK/1000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRDK/2000G
- Part Number: SFYRDK/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SNV3S/1000G
- Part Number: SNV3S/1000G
- Gen 4x4 NVMe PCIe Performance
- 3-year Limited Warranty
- Includes Acronis cloning software
- Up to 6,000MB/s Read, 4,000MB/s Write
- Learn more
-
Part Number: SKC3000S/1024G
- Part Number: SKC3000S/1024G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SKC600/1024G
- Part Number: SKC600/1024G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SQ500S37/240G
- Part Number: SQ500S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more