MSI - Desktop Codex R 12th

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    SSD M.2 NVME 2280 (double-sided)

Compatible Storage Upgrades

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel B660

    Intel Core i5 12th Gen Intel B660

    Intel Core i7 12th Gen Intel B660

    Intel Core i9 12th Gen Intel B660

Codex R 12TC-047US; Codex R 12TC-048US; Codex R 12TG-049US; Codex R 12TH-053US; CoR12TC047; CoR12TC048; CoR12TG049; CoR12TH053

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.

Kingston FURY Configuration Notes

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations. Per MSI, overclocking is limited by the Ranks and number of DIMMs installed per channel.

Compatible Upgrades For Your System

Overclocking pushes the stable industry standard specifications of memory (speed, latencies, voltage) to achieve higher performance. While generally safe and supported by Intel, AMD, and the motherboard/system manufacturers, overclocking is done at your own risk. System stability may be compromised by some speeds and configurations. The FURY parts listed are based on motherboard manufacturer testing (QVLs) and Kingston internal testing, however some systems may require premium components (high-end processor models, motherboards, power supplies, and water cooling) to achieve stable overclocking, particularly at extreme speeds.

Results
Speed{{Footnote.A65242}}
Total (kit) Capacity
Module Capacity
Ranking
DRAM Density
Kit
Filter Filters Applied
Results
Total (kit) Capacity
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied
Results
Capacity Range
Form Factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.