ASRock - Server Board WC422D8A-2T

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    256 GB Reg ECC RDIMMs

    512 GB LRDIMMs

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-2100/W-2200 Series Intel C42x Series

Important Configuration Notes

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Faster memory will clock down to run at optimal speeds depending on processor model installed.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.
  • Registered and Load Reduced modules CANNOT be mixed within the same system.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).