Supermicro - H13SRD-F Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - M.2 SATA
SSD M.2 NVME 2280 (double-sided)
SSD M.2 NVME 22110 (double-sided)
-
4 Socket(s)
-
AMD Ryzen 3 7000 Series
AMD Ryzen 5 7000 Series
AMD Ryzen 7 7000 Series
AMD Ryzen 9 7000 Series
MBD-H13SRD-F
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.
- This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
Compatible Upgrades For Your System
- Server Premier
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KSM48E40BD8KI-32HA
- Part Number: KSM48E40BD8KI-32HA
- DDR5 4800MT/s ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 4800MT/s ECC Unbuffered DIMM CL40 2RX8 1.1V 288-pin 16Gbit Hynix A
-
Part Number: KSM48E40BS8KI-16HA
- Part Number: KSM48E40BS8KI-16HA
- DDR5 4800MT/s ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 4800MT/s ECC Unbuffered DIMM CL40 1RX8 1.1V 288-pin 16Gbit Hynix A
-
Part Number: KSM52E42BD8KM-32HA
- Part Number: KSM52E42BD8KM-32HA
- DDR5 5200MT/s ECC Unbuffered DIMM CL42 2RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 5200MT/s ECC Unbuffered DIMM CL42 2RX8 1.1V 288-pin 16Gbit Hynix A
-
Part Number: KSM52E42BS8KM-16HA
- Part Number: KSM52E42BS8KM-16HA
- DDR5 5200MT/s ECC Unbuffered DIMM CL42 1RX8 1.1V 288-pin 16Gbit Hynix A
- Spec Sheet PDF
- PCN
DDR5 5200MT/s ECC Unbuffered DIMM CL42 1RX8 1.1V 288-pin 16Gbit Hynix A
Filter
Filters
Applied
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.