ASUS - Z890 MAX GAMING WIFI7 Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    192 GB (w/current Kingston 48GB DIMMs)

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Compatible Storage Upgrades

  • 4 Socket(s)

  • Intel Core Ultra 5 Series 2 Intel Z890

    Intel Core Ultra 7 Series 2 Intel Z890

    Intel Core Ultra 9 Series 2 Intel Z890

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Industry standard "ValueRAM" DIMMs / CUDIMMs are built to JEDEC specifications and will operate at the standard speed allowed by the processor and chipset. Based on processor rules for module ranks and configurations they will safely clock down to lower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • 1PDC (1 DIMM per Channel) = 2 DIMMs
  • 2DPC (2 DIMMs per Channel) = 4 DIMMs
  • 1R (Single Rank)
  • 2R (Dual rank)
  • Per Intel, Core Ultra Series 2 processors support the following standard speeds by rank and socket configuration:
  • 1DPC 1R/2R Up to 5600MT/s
  • 2DPC 1R Up to 4800MT/s
  • 2DPC 2R Up to 4400MT/s
  • Some motherboards may exceed Intel population rules and support 6400MT/s industry standard CUDIMMs installed in 1DPC. If supported by the motherboard, an Intel Core Ultra 9K/7K/5K model is also required for 6400MT/s. Non-K model processors will clock the memory down to 5600MT/s or slower.

Compatible Upgrades For Your System

Overclocking pushes the stable industry standard specifications of memory (speed, latencies, voltage) to achieve higher performance. While generally safe and supported by Intel, AMD, and the motherboard/system manufacturers, overclocking is done at your own risk. System stability may be compromised by some speeds and configurations. The FURY parts listed are based on motherboard manufacturer testing (QVLs) and Kingston internal testing, however some systems may require premium components (high-end processor models, motherboards, power supplies, and water cooling) to achieve stable overclocking, particularly at extreme speeds.

Results
Speed{{Footnote.A65242}}
Total (kit) Capacity
Module Capacity
Ranking
DRAM Width
DRAM Density
Profile Type
Voltage
Kit
Filter Filters Applied
Results
Total (kit) Capacity
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form Factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.