MSI - X58 Pro-E Motherboard
-
Bus Architecture
PCI
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
-
6 Socket(s)
-
Intel Core i7 Intel X58
Intel Core i7 Extreme Edition Intel X58
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel Mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- MODULES MUST BE ORDERED AND INSTALLED GROUPS OF THREE for Triple Channel Mode. Kingston offers "K3" kit part numbers for Triple Channel mode.
- A 64-bit Operating System is required to utilize more than 4GB of memory. If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation).
- * Please refer to the MSI manual for proper installation of DIMMs for Single Channel, Dual Channel and Triple Channel configurations.
- Although it is physically possible to install more memory, the system will only recognize 24GB maximum.
- Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KVR16LN11/4
- Part Number: KVR16LN11/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16N11/8
- Part Number: KVR16N11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
Filter
Filters
Applied
-
Part Number: SKC600/1024G
- Part Number: SKC600/1024G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SQ500S37/240G
- Part Number: SQ500S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.