Dell/Alienware - PowerEdge R910 (Xeon E7-xxxx)

configurator results memory

  • Standard

    4 GB (Removable)

  • Maximum

    2 TB on Xeon E7

  • CPU 1:

    Two Memory Risers per CPU

    MR A
    		...
    		MR B
    		...

  • CPU 2:

    MR A
    		...
    		MR B
    		....

  • CPU 3:

    MR A
    		...
    		MR B
    		...

  • CPU 4:

    MR A
    		...
    		MR B
    		...

  • Bus Architecture

    SSD - SATA 2.5-inch 9.5mm

Compatible Storage Upgrades

  • 8 Socket(s) per Memory Riser

    64 Socket(s) using 8 Memory Risers

  • Intel Xeon E7 Series Intel 7500

Important Configuration Notes

  • VERIFY XEON PROCESSOR
  • MODEL BEFORE ORDERING
  • XEON 7500/6500 SERIES
  • NO LONGER SUPPORTED
  • Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
  • DIMMs must be populated in matched pairs for each processor (A1/A2, A3/A4). Single DIMM operation is not supported.
  • 4GB DDR3-1333 Reg ECC modules come in two versions: 313S/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank.
  • Xeon E7 series processors support high density quad-rank 32GB (KTD-PE310QLV/32G), dual-rank 16GB (KTD-PE313LV/16G) and low density quad-rank 16GB (KTD-PE313QLV/16G) RDIMMs.
  • Xeon 7500/6500 series processors support low density quad-rank 16GB (KTD-PE313QLV/16G) RDIMMs and lower capacity parts at 1.5V.

Compatible Upgrades For Your System

Results
Capacity Range
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.