Gigabyte - GA-X99-UD7 WIFI Motherboard
-
Bus Architecture
PCI
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - M.2 SATA
SSD - M.2 PCIe
-
8 Socket(s)
-
Intel Core i7 5800/5900 Intel X99
Important Configuration Notes
- Kingston does not recommend that any user attempt to run the system faster than OEM or published system specifications. Please refer to your OEM, system or other component vendor's technical specifications for additional information.
- An Intel Core i7-5800/5900 or i7-6800/6900 series processor is required for HyperX memory.
- MODULES MUST BE ORDERED AND INSTALLED IN GROUPS OF FOUR for Quad Channel mode.
- This motherboard supports the use of server DDR4 1Rx8/2Rx8 or 1Rx4/2Rx4 ECC Registered DIMMs with a Xeon E5 v3 or v4 series processor only.
- ECC Registered DIMMs and Non-ECC Unbuffered DIMMs cannot be mixed.
Compatible Upgrades For Your System
- ValueRAM
- Solid-state drives
Filter
Filters
Applied
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8L/8
- Part Number: KVR26N19S8L/8
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SFYRS/500G
- Part Number: SFYRS/500G
- PCIe 4.0 NVMe M.2
- 7,300MB/s read, 3,900MB/s write
- Includes Acronis cloning software
- Single-Sided
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SKC600/256G
- Part Number: SKC600/256G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s read, 500MB/s write
- Learn more
-
Part Number: SNV3S/500G
- Part Number: SNV3S/500G
- Gen 4x4 NVMe PCIe performance
- Three-year limited warranty
- Includes Acronis cloning software
- Up to 5,000MB/s read, 3,000MB/s write
- Learn more
-
Part Number: SKC3000S/512G
- Part Number: SKC3000S/512G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 3,900MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SEDC600M/480G
- Part Number: SEDC600M/480G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- PCN
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.