ASUS - Z170M-PLUS Motherboard
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD - M.2 SATA
SSD - M.2 NVMe
SSD - M.2 PCIe
-
4 Socket(s)
-
Intel Celeron Intel Z170
Intel Core i3 Intel Z170
Intel Core i5 Intel Z170
Intel Core i7 Intel Z170
Intel Pentium Intel Z170
Important Configuration Notes
- Faster memory will clock down to run at optimal speed depending on processor model installed. Intel® 7th Gen processors support DDR4-2400 and Intel® 6th Gen processors support DDR4-2133.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6/4
- Part Number: KVR26N19S6/4
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6L/4
- Part Number: KVR26N19S6L/4
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8L/8
- Part Number: KVR26N19S8L/8
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support. Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).
-
Part Number: SFYRS/1000G
- Part Number: SFYRS/1000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRSK/1000G
- Part Number: SFYRSK/1000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SFYRDK/2000G
- Part Number: SFYRDK/2000G
- PCIe 4.0 NVMe M.2
- 7,300MB/s Read, 7,000MB/s Write
- Includes Acronis cloning software
- Double-sided
- Learn more
-
Part Number: SNV3S/1000G
- Part Number: SNV3S/1000G
- Gen 4x4 NVMe PCIe Performance
- 3-year Limited Warranty
- Includes Acronis cloning software
- Up to 6,000MB/s Read, 4,000MB/s Write
- Learn more
-
Part Number: SKC3000S/1024G
- Part Number: SKC3000S/1024G
- PCIe 4.0 NVMe M.2
- 7,000MB/s Read, 6,000MB/s Write
- Includes Acronis cloning software
- Single-sided
- Learn more
-
Part Number: SKC600/1024G
- Part Number: SKC600/1024G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SQ500S37/240G
- Part Number: SQ500S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more