HP/HPE - ProLiant DL560 Gen10 (G10)

configurator results memory

  • Standard

    8 GB (Removable)

  • Maximum

    3 TB Reg ECC RDIMMs

    6 TB LRDIMMs

Compatible Memory Upgrades

  • Processor 1 (installed):

  • Processor 2 (installed):

  • Processor 3 (optional):

  • Processor 4 (optional):

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    Flash - microSDHC

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 2.5-inch 7mm

    SSD - M.2 SATA

Compatible Storage Upgrades

  • 12 Socket(s) per CPU

    48 Socket(s) using four CPUs

  • Intel Xeon Scalable 1st/2nd Gen Intel C62x Series

840369-xxx; 840370-xxx; 840371-xxx; 840372-xxx; 840373-xxx; 840374-xxx; 841730-xxx; 870740-xxx; 875797-xxx; 875807-xxx; 880173-xxx

Important Configuration Notes

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
  • This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
  • If two processors are installed, only 24 DIMM slots are available. When populating with four processors 48 DIMM slots are available.

Compatible Upgrades For Your System

Results
Speed{{Footnote.A65242}}
DIMM Type
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied
Results
Capacity Range
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.