Supermicro - SuperServer 5130DQ-IL (Super C7Q270-CB-ML)
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
SSD - M.2 (TBD)
-
4 Socket(s)
-
Intel Core i3 Intel Q270
Intel Core i5 Intel Q270
Intel Core i7 Intel Q270
SYS-5130DQ-IL
Important Configuration Notes
- Faster memory will clock down to run at optimal speed depending on processor model installed. Intel® 7th Gen processors support DDR4-2400 and Intel® 6th Gen processors support DDR4-2133.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6/4
- Part Number: KVR26N19S6/4
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6L/4
- Part Number: KVR26N19S6L/4
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8L/8
- Part Number: KVR26N19S8L/8
- DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered VLP DIMM CL19 1RX8 1.2V 288-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SKC600/2048G
- Part Number: SKC600/2048G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SA400S37/480G
- Part Number: SA400S37/480G
- SATA Rev 3.0
- 500MB/s read, 450MB/s write
- Includes Acronis cloning software
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.