ASRock - Server Board E3C242D4U2-2T
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - M.2 SATA
SSD - M.2 NVMe
-
4 Socket(s)
-
Intel Xeon E-2100/E-2200 Series Intel C24x Series
Important Configuration Notes
- Only Intel Xeon E-x2xx Series processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model installed.
- This system supports both ECC and non-ECC memory. Mixing ECC and non-ECC modules is not recommended.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
Compatible Upgrades For Your System
- ValueRAM
- Server Premier
- Solid-State Drives
-
Part Number: KVR26N19D8/16
- Part Number: KVR26N19D8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S8/16
- Part Number: KVR26N19S8/16
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit
-
Part Number: KVR26N19S8/8
- Part Number: KVR26N19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KSM26ED8/16HD
- Part Number: KSM26ED8/16HD
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Hynix D
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Hynix D
-
Part Number: KSM26ED8/16MR
- Part Number: KSM26ED8/16MR
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Micron R
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 8Gbit Micron R
-
Part Number: KSM26ED8/32HC
- Part Number: KSM26ED8/32HC
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 16Gbit Hynix C
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 16Gbit Hynix C
-
Part Number: KSM26ED8/32MF
- Part Number: KSM26ED8/32MF
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 16Gbit Micron F
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 2RX8 1.2V 288-pin 16Gbit Micron F
-
Part Number: KSM26ES8/16HC
- Part Number: KSM26ES8/16HC
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit Hynix C
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit Hynix C
-
Part Number: KSM26ES8/16MF
- Part Number: KSM26ES8/16MF
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit Micron F
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 16Gbit Micron F
-
Part Number: KSM26ES8/8HD
- Part Number: KSM26ES8/8HD
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Hynix D
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Hynix D
-
Part Number: KSM26ES8/8MR
- Part Number: KSM26ES8/8MR
- DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Micron R
- Spec Sheet PDF
- PCN
DDR4 2666MT/s ECC Unbuffered DIMM CL19 1RX8 1.2V 288-pin 8Gbit Micron R
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SKC600/2048G
- Part Number: SKC600/2048G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SA400S37/480G
- Part Number: SA400S37/480G
- SATA Rev 3.0
- 500MB/s read, 450MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more