現在、英国のサイトにアクセスしていることに気づきました。代わりにメインサイトにアクセスしますか?

Gigabyte - B860M E Motherboard

configurator results memory

  • 標準

    0 GB (Removable)

  • 最大

    128 GB

  • バスアーキテクチャ

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    PCIe 4.0

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 2 Socket(s) 1 bank(s) of 2

  • Intel Core Ultra 5 Series 2 Intel B860

    Intel Core Ultra 7 Series 2 Intel B860

    Intel Core Ultra 9 Series 2 Intel B860

重要な構成に関する備考

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Industry standard "ValueRAM" DIMMs / CUDIMMs are built to JEDEC specifications and will operate at the standard speed allowed by the processor and chipset. Based on processor rules for module ranks and configurations they will safely clock down to lower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • 1PDC (1 DIMM per Channel) = 2 DIMMs
  • 1R (Single Rank)
  • 2R (Dual rank)
  • Per Intel, Core Ultra Series 2 processors support the following standard speeds by rank and socket configuration:
  • 1DPC 1R/2R Up to 6400MT/s
  • 2DPC 1R/2R Up to 5600MT/s
  • An Intel Core Ultra 9K/7K/5K model is required for 6400MT/s. Non-K model processors will clock the memory down to 5600MT/s or slower.

Kingston FURY 構成の注

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Performance may increase with BIOS updates.
  • Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
  • Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
  • This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

システム用アップグレード

オーバークロックにより、安定した業界標準のメモリ仕様(速度、レイテンシ、電圧)を上回る高い性能が得られます。通常、オーバークロックは安全で、Intel や AMD などのマザーボード/システムメーカーによってサポートされていますが、ユーザーの責任で行っていただく必要があります。速度や構成によっては、システムの安定性が低下する場合があります。記載されている FURY のパーツは、マザーボードメーカーのテスト(QVL)と Kingston の社内テストに基づいていますが、システムによっては、特に超高速時にオーバークロックを安定させるために、プレミアムコンポーネント(ハイエンドプロセッサモデル、マザーボード、電源、水冷)が必要な場合があります。

ヒートシンク (SFYRSK/xxxG, SFYRDK/xxxG) を備えた Kingston FURY Renegadeは、そのサイズ(~80mm x 23.67mm x 10.5mm) に対応するほとんどのシステムで使用できます。これには、さまざまなマザーボード、デスクトップ PC、ゲーミング PC、そして PlayStation 5 が含まれます。サイズが合うか不明な場合は、システムメーカーのサポートマニュアルをご確認いただくか、Kingston テクニカルサポートにお問い合わせください。
注:Intel® NUCのような小型フォームファクタのシステムでは、ヒートシンクの高さに物理的に対応できない場合があります。この場合、ヒートシンクなしの FURY Renegade 、(SFYRS/xxxG, SFYRD/xxxG) を推奨します。