Biostar - Z790 VALKYRIE Motherboard

Standard

0 MB (Removable)
Maximal

192 GB

Kompatible Arbeitsspeichererweiterungen

Busarchitektur

USB 2.0/3.x Type-A

SSD - SATA 2.5-inch 9.5mm

USB 2.0/3.x Type-C

PCIe 4.0

SSD M.2 NVME 2242 (double-sided)

SSD M.2 NVME 2260 (double-sided)

SSD M.2 NVME 22110 (double-sided)

SSD M.2 NVME 2280 (Heat Sink)

Kompatible Speichererweiterungen

4 Socket(s)

Intel Core i3 12th/13th/14th Gen Intel Z790

Intel Core i5 12th/13th/14th Gen Intel Z790

Intel Core i7 12th/13th/14th Gen Intel Z790

Intel Core i9 12th/13th/14th Gen Intel Z790

MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.

JEDEC spec (ValueRAM) DIMMs will operate at 4800MT/s DDR5 installed in 1DPC (1 DIMM per Channel or 1x Dual Channel kit) configurations on Intel 12th Gen processors. Due to processor/chipset limitations DIMMs installed in 2DPC (2 DIMMs per Channel or 2x Dual Channel kits) are limited to operate at and will safely clock down to 4400MT/s or 4000MT/s. Refer to motherboard manual and QVL for supported memory configurations and speeds.

FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
Check with your motherboard QVL for the latest tested memory parts and supported configurations.
Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.

A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
Performance may increase with BIOS updates.

ValueRAM
SSD-Laufwerke

Kingston FURY Renegade mit Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) passt in die meisten Systeme, die für seine Größe geeignet sind (~80mm x 23.67mm x 10.5mm). Dazu gehören eine Reihe von Motherboards, Desktop-PCs, Gaming-PCs und die PlayStation 5. Wenn Sie sich nicht sicher sind, ob das Modul passt, lesen Sie bitte das Support-Handbuch Ihres Systemherstellers oder wenden Sie sich an den technischen Support von Kingston.
Hinweis: Einige Systeme mit kleinem Formfaktor, z.B. Intel® NUC sind für die Höhe des Heatsink physisch nicht geeignet. Unter diesen Umständen empfehlen wir FURY Renegade ohne Heatsink (SFYRS/xxxG, SFYRD/xxxG).