Biostar - Z790 VALKYRIE Motherboard

configurator results memory

  • Estándar

    0 MB (Removable)

  • Máximo

    192 GB

  • Arquitectura del bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    PCIe 4.0

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel Z790

    Intel Core i5 12th/13th/14th Gen Intel Z790

    Intel Core i7 12th/13th/14th Gen Intel Z790

    Intel Core i9 12th/13th/14th Gen Intel Z790

Notas importantes sobre la configuración

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • JEDEC spec (ValueRAM) DIMMs will operate at 4800MT/s DDR5 installed in 1DPC (1 DIMM per Channel or 1x Dual Channel kit) configurations on Intel 12th Gen processors. Due to processor/chipset limitations DIMMs installed in 2DPC (2 DIMMs per Channel or 2x Dual Channel kits) are limited to operate at and will safely clock down to 4400MT/s or 4000MT/s. Refer to motherboard manual and QVL for supported memory configurations and speeds.

Notas sobre la configuración de Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Performance may increase with BIOS updates.

Actualizaciones compatibles para su sistema

Kingston FURY Renegade con disipador térmico (SFYRSK/xxxG, SFYRDK/xxxG) encajará en la mayoría de los sistemas compatibles con su tamaño (~80mm x 23.67mm x 10.5mm). Esto incluye diversas placas base, ordenadores de sobremesa y para juegos PC, y PlayStation 5. Si no está seguro sobre si encajará, consulte el manual de asistencia técnica del fabricante de su sistema, o bien contacte con el servicio de Asistencia técnica de Kingston.
Nota: algunos sistemas de factor de forma pequeño, como Intel® NUC, no tienen espacio físico para la altura del disipador térmico. En tales circunstancias, sugerimos FURY Renegade sin disipador térmico (SFYRS/xxxG, SFYRD/xxxG).