ASUS - PRIME X299-A II Motherboard

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    256 GB

Compatible Memory Upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    SSD - M.2 NVMe

Compatible Storage Upgrades

  • 8 Socket(s) using Skylake-X/Cascade Lake-X processors

    4 Socket(s) using Kabylake-X processors

  • Intel Core i9 Extreme Edition Cascade Lake-X Intel X299

Important Configuration Notes

  • Cascade Lake-X processors are required to use memory modules built with 16Gbit density DRAM. BIOS/firmware updates and/or specific board revisions may also be required. All other CPUs please contact the manufacturer.
  • QUAD CHANNEL memory bandwidth is only supported on Intel Skylake-X and Cascade Lake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN FOURS for Quad Channel mode.
  • DUAL CHANNEL memory bandwidth is supported on Intel Kabylake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
  • Per ASRock, when using Kabylake-X based processors, Dual Channel operation is limited to sockets C1+D1, C2+D2. Refer to manual for proper installation.
  • Refer to the motherboard QVL for supported speeds and socket configurations for overclock.

Kingston FURY Configuration Notes

  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability
  • It is not recommended to install two K4 "Kit of 4" parts unless listed as a verified compatible configuration on the QVL.
  • RGB lighting customization is supported with Kingston's FURY CTRL application, downloadable from the Microsoft Store. Most motherboard vendor RGB applications are also compatible with FURY RGB memory.

Compatible Upgrades For Your System

Overclocking pushes the stable industry standard specifications of memory (speed, latencies, voltage) to achieve higher performance. While generally safe and supported by Intel, AMD, and the motherboard/system manufacturers, overclocking is done at your own risk. System stability may be compromised by some speeds and configurations. The FURY parts listed are based on motherboard manufacturer testing (QVLs) and Kingston internal testing, however some systems may require premium components (high-end processor models, motherboards, power supplies, and water cooling) to achieve stable overclocking, particularly at extreme speeds.

Results
Speed{{Footnote.A65242}}
Total (kit) Capacity
Module Capacity
Ranking
DRAM Density
Kit
Filter Filters Applied
Results
Speed{{Footnote.A65242}}
Form Factor
Total (kit) Capacity
Module Capacity
Ranking
DRAM Density
Kit
Filter Filters Applied
Results
Capacity Range
Form Factor
Interface
Filter Filters Applied
* Kits: warranty void and returns not accepted if sold or used separately.