ASUS - PRIME X299-A II Motherboard

configurator results memory

  • tiêu chuẩn

    0 MB (Removable)

  • Tối đa

    256 GB

  • Thông số Bus

    USB 2.0/3.x Type-A

    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    SSD - M.2 NVMe

  • 8 Socket(s) using Skylake-X/Cascade Lake-X processors

    4 Socket(s) using Kabylake-X processors

  • Intel Core i9 Extreme Edition Cascade Lake-X Intel X299

Lưu ý cấu hình quan trọng

  • Cascade Lake-X processors are required to use memory modules built with 16Gbit density DRAM. BIOS/firmware updates and/or specific board revisions may also be required. All other CPUs please contact the manufacturer.
  • QUAD CHANNEL memory bandwidth is only supported on Intel Skylake-X and Cascade Lake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN FOURS for Quad Channel mode.
  • DUAL CHANNEL memory bandwidth is supported on Intel Kabylake-X processors. MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
  • Per ASRock, when using Kabylake-X based processors, Dual Channel operation is limited to sockets C1+D1, C2+D2. Refer to manual for proper installation.
  • Refer to the motherboard QVL for supported speeds and socket configurations for overclock.

Ghi chú cấu hình Kingston FURY

  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability
  • It is not recommended to install two K4 "Kit of 4" parts unless listed as a verified compatible configuration on the QVL.
  • RGB lighting customization is supported with Kingston's FURY CTRL application, downloadable from the Microsoft Store. Most motherboard vendor RGB applications are also compatible with FURY RGB memory.

Nâng cấp tương thích cho hệ thống của bạn

Hoạt động ép xung làm tăng mức độ ổn định của bộ nhớ theo các thông số kỹ thuật tiêu chuẩn trong ngành (tốc độ, độ trễ, điện áp) để đạt được hiệu suất cao hơn. Thường thì hoạt động này an toàn. Intel, AMD và các nhà sản xuất hệ thống/bo mạch chủ cũng hỗ trợ hoạt động này. Tuy nhiên, bạn tự chịu rủi ro của việc ép xung. Tính ổn định của hệ thống có thể bị tổn hại do tốc độ và cấu hình. Các cấu phần FURY được nêu là dựa trên thử nghiệm của nhà sản xuất bo mạch chủ (QVL) và thử nghiệm nội bộ của Kingston. Tuy nhiên, một số hệ thống có thể đòi hỏi các linh kệ cao cấp (mẫu bộ xử lý, bo mạch chủ, bộ nguồn và tản nhiệt nước phiên bản cao cấp) để ép xung ổn định, đặc biệt là khi ở tốc độ cực cao.