HP/HPE - ProLiant DL388 Gen10
-
Standard
8 GB (Removable)
-
Maximum
1.5 TB *Reg ECC RDIMMs *(depending on CPU)
3 TB *LRDIMMs *(depending on CPU)
-
8GB Standard:
Processor 1 (installed):
8 GB -
Processor 2 (optional):
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
12 Socket(s) per CPU
24 Socket(s) using two CPUs
-
Intel Xeon Scalable 1st/2nd Gen Intel C62x Series
Important Configuration Notes
- Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
- Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
- White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Compatible Upgrades For Your System
- System Specific Memory
- Solid-State Drives
Filter
Filters
Applied
Filter
Filters
Applied
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.