HP/HPE - ProLiant DL388 Gen10

configurator results memory

  • Standard

    8 GB (Removable)

  • Maximum

    1,5 TB *Reg ECC RDIMMs *(depending on CPU)

    3 TB *LRDIMMs *(depending on CPU)

  • 8GB Standard:

    Processor 1 (installed):

    8 Go
  • Processor 2 (optional):

  • Architecture du bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

  • 12 Socket(s) per CPU

    24 Socket(s) using two CPUs

  • Intel Xeon Scalable 1st/2nd Gen Intel C62x Series

Notes de configuration importantes

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
  • This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
  • If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
  • White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.

Mises à niveau compatibles pour votre système