ASUS - PRIME H610M-D

configurator results memory

  • 표준

    0 MB (Removable)

  • 최대

    96 GB

  • 버스 아키텍처

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 2 Socket(s)

  • Intel Core i3 12th/13th Gen Intel H610

    Intel Core i5 12th/13th Gen Intel H610

    Intel Core i7 12th/13th Gen Intel H610

    Intel Core i9 12th/13th Gen Intel H610

중요 구성 노트

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.

Kingston FURY 구성 노트

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Per ASRock, with an Intel 12th/13th Gen processors installed, the following overclocked memory speeds are supported:
  • 1DPC 1R Up to 6800+ MT/s (OC)
  • 1DPC 2R Up to 6000+ MT/s (OC)
  • Performance may increase with BIOS updates.

귀하의 시스템 호환 업그레이드

(SFYRSK/xxxG, SFYRDK/xxxG) 방열판이 장착된Kingston FURY Renegade는(~80mm x 23.67mm x 10.5mm) 크기를 수용할 수 있는 대부분의 시스템에 장착 가능합니다. 여기에는 다양한 마더보드, 데스크톱, 게임용 PC 및 PlayStation 5가 포함됩니다. 적합한지 여부가 확실하지 않은 경우, 시스템 제조업체의 지원 설명서를 검토하거나 Kingston 기술 지원팀에 문의하시기 바랍니다.
참고: Intel® NUC와 같은 일부 소형 폼 팩터 시스템은 방열판의 높이를 물리적으로 수용할 수 없습니다. 이러한 상황에서는(SFYRS/xxxG, SFYRD/xxxG) 방열판이 없는 FURY Renegade를 권장합니다.