HP/HPE - ProLiant ML350p Gen8 (G8)
-
표준
8 GB (Removable)
16 GB (Removable)
-
최대
128 GB ECC UDIMMs
384 GB Reg ECC RDIMMs
768 GB LRDIMMs
-
8GB Standard:
Processor 1 (installed):
4 GB4 GB -
Processor 2 (optional):
-
16GB Standard:
Processor 1 (installed):
4 GB4 GB4 GB4 GB -
Processor 2 (optional):
-
버스 아키텍처
PCI-X
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
24 Socket(s) using two processors
12 Socket(s) per processor
-
Intel Xeon E5-2600 Intel C600 Series
Intel Xeon E5-2600 v2 Intel C600 Series
470065-652; 470065-713; 470065-818; 646675-001; 646676-001; 646677-001; 646678-001; 668889-035; 669045-425; 678237-001; 736974-035; 736974-425; 736978-045; 736978-425; 736983-S01
중요 구성 노트
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC). It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open. 1.35V LV RDIMMs up to 2DPC. Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz or 1066MHz. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.
- 1866MHz and 1600MHz Low Voltage memory requires E5-2600 v2 series processors.
- Xeon E5-2600 v2 series processors require HP System ROM revision 09/08/2013 or newer. Revision 09/18/2013 or newer is required if using LRDIMMs.
귀하의 시스템 호환 업그레이드
- SSD(솔리드 스테이트 드라이브)
필터
Filters
Applied
-
Part Number: SEDC600M/1920G
- 부품 번호: SEDC600M/1920G
- 데이터 센터 환경에 맞는 설계
- 온보드 전력 손실 보호(PLP)
- 일관된 지연시간 및 IOPS, 안정적인 QoS
- Acronis 복제 소프트웨어 포함
- 최대 560MB/s 읽기, 530MB/s 쓰기
- 자세히 알아보기
* Kits: warranty void and returns not accepted if sold or used separately.