我们注意到您目前正在访问英国网站。您想访问我们的主网站吗?

ASRock - Z690 Pro RS Motherboard

configurator results memory

  • 标准

    0 GB (Removable)

  • 最大

    128 GB

  • 总线架构

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel Z690

    Intel Core i5 12th Gen Intel Z690

    Intel Core i7 12th Gen Intel Z690

    Intel Core i9 12th Gen Intel Z690

重要配置说明

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.

Kingston FURY 配置说明

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.

适用于您的系统的兼容升级产品

超频通过超越行业标准内存规格(速度、延迟、电压)实现更高性能。尽管超频通常是安全的并得到 Intel、AMD 和主板/系统制造商的支持,但超频风险自负。系统稳定性可能会受到部分速度和配置的负面影响。列出的 FURY 部件依据的是主板制造商测试 (QVL) 和金士顿内部测试,不过,部分系统可能需要高品质组件(高端的处理器型号、主板、电源和水冷散热)才能实现稳定的超频,尤其是对于极快运行速度而言。

带散热器(SFYRSK/xxxG, SFYRDK/xxxG)的金士顿FURY Renegade适合能容纳其尺寸 (~80mm x 23.67mm x 10.5mm)的大多数系统。这包括各种主板、台式机、游戏 PC 及 PlayStation 5。如果您不确定它是否适合,请查阅系统制造商的支持手册,或者联系金士顿技术支持。
注意:一些小型系统如Intel® NUC在物理上无法容纳散热器的高度。在这种情况下,建议使用不带散热器(SFYRS/xxxG, SFYRD/xxxG)的FURY Renegade。