Supermicro - X13SRA-TF Motherboard
-
总线架构
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD M.2 NVME 22110 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
8 Socket(s)
-
Intel Xeon W-3500/3400 Series Intel W790
Intel Xeon W-2500/2400 Series Intel W790
MBD-X13SRA-TF
重要配置说明
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
- Mixing x4 and x8 type modules is NOT allowed.
- JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
- Intel limits the compatibility of 96GB RDIMMs, which cannot be mixed with any other capacities or module types.
- All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
- Some memory configurations may NOT be supported, please refer to manual for supported memory configuration and speeds.
Kingston FURY 配置说明
- This motherboard does not support XMP-based memory overclocking.
- Kingston FURY Renegade Pro featuring Plug N Play (automatic overclock) at 4800MT/s will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.
- Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
- If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.
适用于您的系统的兼容升级产品
- Kingston FURY Memory
- Server Premier
- 固态硬盘
超频通过超越行业标准内存规格(速度、延迟、电压)实现更高性能。尽管超频通常是安全的并得到 Intel、AMD 和主板/系统制造商的支持,但超频风险自负。系统稳定性可能会受到部分速度和配置的负面影响。列出的 FURY 部件依据的是主板制造商测试 (QVL) 和金士顿内部测试,不过,部分系统可能需要高品质组件(高端的处理器型号、主板、电源和水冷散热)才能实现稳定的超频,尤其是对于极快运行速度而言。
带散热器(SFYRSK/xxxG, SFYRDK/xxxG)的金士顿FURY Renegade适合能容纳其尺寸 (~80mm x 23.67mm x 10.5mm)的大多数系统。这包括各种主板、台式机、游戏 PC 及 PlayStation 5。如果您不确定它是否适合,请查阅系统制造商的支持手册,或者联系金士顿技术支持。 注意:一些小型系统如Intel® NUC在物理上无法容纳散热器的高度。在这种情况下,建议使用不带散热器(SFYRS/xxxG, SFYRD/xxxG)的FURY Renegade。
-
产品型号: SEDC600ME/480G
- 产品型号: SEDC600ME/480G
- 专为数据中心环境而设计
- 板载断电保护 (PLP)
- 一致的延迟和 IOPS,可靠的 QoS
- 包括 Acronis cloning software
- TCG Opal 2.0,AES 256-bit 加密
- 560MB/秒读取速度、470MB/秒写入速度
- 阅读更多信息
-
产品型号: SEDC600M/480G
- 产品型号: SEDC600M/480G
- 专为数据中心环境而设计
- 板载断电保护 (PLP)
- 一致的延迟和 IOPS,可靠的 QoS
- 包括 Acronis 克隆软件
- 读取速度高达 560MB/s,写入速度高达 470MB/s
- PCN
- 阅读更多信息