MSI - MEG Z790 ACE Motherboard

Standard

0 GB (Removable)
Maximum

192 GB

Mises à niveau des mémoires compatibles

Architecture du bus

USB 2.0/3.x Type-A

SSD - SATA 2.5-inch 9.5mm

USB 2.0/3.x Type-C

SSD M.2 NVME 2242 (double-sided)

SSD M.2 NVME 2260 (double-sided)

SSD M.2 NVME 22110 (double-sided)

SSD M.2 NVME 2280 (Heat Sink)

Mises à niveau du stockage compatible

4 Socket(s)

Intel Core i3 12th/13th Gen Intel Z790

Intel Core i5 12th/13th/14th Gen Intel Z790

Intel Core i7 12th/13th/14th Gen Intel Z790

Intel Core i9 12th/13th/14th Gen Intel Z790

MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.

Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Intel 12th Gen processors, in configurations of 2DPC (2 DIMMs per Channel, 4 total DIMMs installed), standard JEDEC spec (ValueRAM) memory (non-XMP) may clock down. Intel 13th Gen processors natively support up to 5600MT/s DDR5 in 1DPC (1R) using standard JEDEC spec (ValueRAM) memory (non-XMP). 2R modules and populations of 2DPC may be forced to operate at slower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
Performance may increase with BIOS updates.

FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
Check with your motherboard QVL for the latest tested memory parts and supported configurations.
If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.

Performance may increase with BIOS updates.
Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

Kingston FURY Memory
ValueRAM
SSD

L’overclocking repousse les spécifications stables de la mémoire (vitesse, latences, tensions) pour offrir une performance supérieure. Bien que l’overclocking soit considéré en général comme une opération sûre et prise en charge par Intel, AMD et d’autres fabricants de cartes mères et de systèmes, n'oubliez pas que vous le réalisez à vos propres risques. Certaines vitesses et configurations peuvent compromettre la stabilité du système. Les composants FURY mentionnés reposent sur les essais du fabricant de la carte mère (QVL) et les essais internes de Kingston. Toutefois, certains systèmes pourraient nécessiter des composants haut de gamme (modèles de processeurs, de cartes mères, de modules d’alimentation et de refroidissement à l’eau haut de gamme) afin d’obtenir un overclocking stable, surtout aux vitesses extrêmes.