HP/HPE - ProLiant DL380 G7 / ML380 G7
-
Standard
4 GB (Removable)
6 GB (Removable)
12 GB (Removable)
-
Maximum
48 GB Using Qty-12 4GB ECC UDIMM
288 GB Using Qty-18 16GB Dual-Rank RDIMM
384 GB Using Qty-12 32GB Quad-Rank RDIMM
-
ECC UDIMM or Quad-Rank RDIMM:
CPU 1
-
CPU 2
-
Reg ECC RDIMM:
CPU 1
-
CPU 2
-
Architecture du bus
USB 2.0/3.x Type-A
PCI-X
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
18 Socket(s) maximum using RDIMMs
12 Socket(s) maximum using UDIMMs or QR RDIMMs
-
Intel Xeon 5500 Series Intel 5520
Intel Xeon 5600 Series Intel 5520
470065-358; 470065-361; 470065-362; 470065-368; 470065-375; 470065-480; 583914-B21; 583966-001; 583966-421; 583967-001; 583967-421; 583968-001; 583968-421; 583970-001; 583970-421; 587493-L21; 589150-001; 589150-421; 589152-001; 589152-421; 605029-425; 605030-425; 605878-005; 633405-421; 633407-421; 633408-421; 639829-005
Notes de configuration importantes
- Kingston offers "K3" kit part numbers for Triple Channel mode. For optimum dual or triple channel configurations, use like modules within the same memory bank. Do not mix single, dual or quad rank modules, varying capacities or speeds.
- Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
- Due to chipset limitations, Kingston's DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank must be unpopulated.
- Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel banks per processor on Intel Xeon 55xx series systems.
- This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
- Low Voltage DIMMs (KTH-PL313LV) can run at 1.35V with Intel Xeon 5600 series processors, but will also run at 1.5V using Xeon 5500 series processors.
Mises à niveau compatibles pour votre système
- SSD
-
Référence produit : SEDC600ME/480G
- Référence produit : SEDC600ME/480G
- Conçu pour les environnements de datacenter
- Protection intégrée contre les coupures d’alimentation (PLP)
- Uniformité de la latence et des IOPS, QoS fiable
- Acronis cloning software inclus
- TCG Opal 2.0, chiffrement AES 256-bit
- 560 Mo/s en lecture, 470 Mo/s en écriture
- En savoir plus
-
Référence produit : SEDC600M/480G
- Référence produit : SEDC600M/480G
- Conçu pour les environnements de datacenter
- Protection embarquée contre les coupures d'alimentation
- Uniformité de la latence et de l'IOPS, QoS fiable
- Comprend le logiciel de clonage Acronis
- Jusqu'à 560MB/s en lecture, 470MB/s en écriture
- PCN
- En savoir plus