HP/HPE - ProLiant ML350p Gen8 (G8)
-
Standard
8 GB (Removable)
16 GB (Removable)
-
Maximum
128 GB ECC UDIMMs
384 GB Reg ECC RDIMMs
768 GB LRDIMMs
-
8GB Standard:
Processor 1 (installed):
4 Go4 Go -
Processor 2 (optional):
-
16GB Standard:
Processor 1 (installed):
4 Go4 Go4 Go4 Go -
Processor 2 (optional):
-
Architecture du bus
PCI-X
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
24 Socket(s) using two processors
12 Socket(s) per processor
-
Intel Xeon E5-2600 Intel C600 Series
Intel Xeon E5-2600 v2 Intel C600 Series
470065-652; 470065-713; 470065-818; 646675-001; 646676-001; 646677-001; 646678-001; 668889-035; 669045-425; 678237-001; 736974-035; 736974-425; 736978-045; 736978-425; 736983-S01
Notes de configuration importantes
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
- No more than two ECC UDIMMs may be installed per channel (2DPC). It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open. 1.35V LV RDIMMs up to 2DPC. Adding additional memory of 3DPC will raise voltage to 1.5V.
- Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz or 1066MHz. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.
- 1866MHz and 1600MHz Low Voltage memory requires E5-2600 v2 series processors.
- Xeon E5-2600 v2 series processors require HP System ROM revision 09/08/2013 or newer. Revision 09/18/2013 or newer is required if using LRDIMMs.
Mises à niveau compatibles pour votre système
- SSD
-
Référence produit : SEDC600ME/480G
- Référence produit : SEDC600ME/480G
- Conçu pour les environnements de datacenter
- Protection intégrée contre les coupures d’alimentation (PLP)
- Uniformité de la latence et des IOPS, QoS fiable
- Acronis cloning software inclus
- TCG Opal 2.0, chiffrement AES 256-bit
- 560 Mo/s en lecture, 470 Mo/s en écriture
- En savoir plus
-
Référence produit : SEDC600M/480G
- Référence produit : SEDC600M/480G
- Conçu pour les environnements de datacenter
- Protection embarquée contre les coupures d'alimentation
- Uniformité de la latence et de l'IOPS, QoS fiable
- Comprend le logiciel de clonage Acronis
- Jusqu'à 560MB/s en lecture, 470MB/s en écriture
- PCN
- En savoir plus