Supermicro - SuperServer 6026T-NTR+ (Super X8DTN+)
-
Standard
0 GB (Removable)
-
Massimo
48 GB ECC UDIMMs
288 GB Reg ECC RDIMMs
-
CPU 1:
-
CPU 2:
-
Architettura bus
PCI-X
PCI Express
SSD - SATA 3.5-inch
-
9 Socket(s) per CPU
18 Socket(s) using two CPUs
-
Intel Xeon 5600/5500 Series Intel 5520
SYS-6026T-NTR+
Note importanti sulla configurazione
- Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
- Due to chipset limitations, Kingston's DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank if present must be unpopulated.
- This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
- Intel Xeon 5600 Series processors support 1.5V DDR3 and 1.35V low-voltage DDR3L memory. If 1.5V and 1.35V DIMMs are mixed, all DIMMs run at 1.5V. Three DIMMs per Channel (DPC) is only supported at 1.5V. Xeon 5500 Series processors support only 1.5V memory.
- Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel banks per processor on Intel Xeon 55xx series systems.
Upgrade compatibili per i vostri sistemi
- Drive allo stato solido
Filtro
Filters
Applied
-
Numero di parte: SEDC600M/480G
- Numero di parte: SEDC600M/480G
- Progettata appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenze e IOPS costanti e uniformi e QoS altamente affidabili
- Include Software di clonazione Acronis
- Fino a 560MB/s in lettura e 530MB/s in scrittura
- PCN
- Ulteriori informazioni
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.