HP/HPE - ProLiant DL560 Gen10 (G10)

configurator results memory

estándar

8 GB (Removable)
Máximo

3 TB Reg ECC RDIMMs

6 TB LRDIMMs

Actualizaciones de memoria compatibles

Processor 1 (installed):

Processor 2 (installed):

Processor 3 (optional):

Processor 4 (optional):

Arquitectura de bus

USB 2.0/3.x Type-A

PCI Express

Flash - microSDHC

SSD - SATA 2.5-inch 9.5mm

SSD - SATA 2.5-inch 7mm

SSD - M.2 SATA

Actualizaciones de Almacenamiento compatibles

12 Socket(s) per CPU

48 Socket(s) using four CPUs

Intel Xeon Scalable 1st/2nd Gen Intel C62x Series

840369-xxx; 840370-xxx; 840371-xxx; 840372-xxx; 840373-xxx; 840374-xxx; 841730-xxx; 870740-xxx; 875797-xxx; 875807-xxx; 880173-xxx

Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.

This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
If two processors are installed, only 24 DIMM slots are available. When populating with four processors 48 DIMM slots are available.

* Kits: la garantía quedará anulada y no se aceptarán devoluciones si las unidades dentro del kit se venden o usan de forma independiente.