Mémoire pour un HP/HPE - ProLiant DL180 G6

Standard

4 GB (Removable)

6 GB (Removable)

12 GB (Removable)
Maximum

48 GB ECC UDIMM

384 GB RDIMM

CPU 1:

CPU 2:

Architecture du bus

PCI

USB 2.0/3.x Type-A

PCI-X

PCI Express

SSD - SATA 2.5-inch 9.5mm

SSD - SATA 3.5-inch

12 Socket(s)

Intel Xeon 5500 Series Intel 5520

Intel Xeon 5600 Series Intel 5520

470065-095; 470065-112; 470065-124; 470065-219; 470065-295; 470065-370; 487502-001; 487502-421; 487503-001; 487503-421; 487506-001; 487506-421; 487507-001; 487507-421; 487507R-421; 487508-001; 487508-421; 507168-B21; 508341-L21; 508342-L21; 508343-L21; 508344-L21; 572832-425; 590637-421; 590638-421; 590639-421; 590640-421; 594911-B21; 651126-S01

Kingston offers "K3" kit part numbers for Triple Channel mode.
This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
DDR3 1333MHz speed requires Intel Xeon X5550 or higher processors. 1066MHz requires Xeon E5520 or higher, Xeon E5506 or lower support 800MHz only. Memory speed will be reduced as the number of modules installed increases.

Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
Due to chipset limitations, Kingston's DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz.
DDR3L low voltage DIMMs support 1.35V and 1.5V on Xeon 5600 processors and 1.5V on Xeon 5500 processors.