HP/HPE - Workstation Z600
-
Standard
1 GB (Removable)
2 GB (Removable)
4 GB (Removable)
-
Maximum
24 GB ECC-UDIMM with 2 CPUs
48 GB RDIMM with 2 CPUs
-
CPU 1:
-
CPU 2:
-
Architecture du bus
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
-
3 Socket(s) per CPU
6 Socket(s) total
-
Intel Xeon 5500 Series Intel 5520
Intel Xeon 5600 Series Intel 5520
AU082US; AU379US; FL845UA; FL846UA; FL847UA; FL852UA; FL867UT; FL868UT; FL869UT; FL870UT; FL871UT; FL872UT; FL873UT; FL892UA; FL893UA; FL894UA; FL895UA; FL896UA; FL897UA; FL898UA; FL903UT; FM023UT; FW863AV; FX551AV; KK532EA; KK541EA; KK542EA; KK549ET; KK550ET; KK551ET; KK556ET; KK557ES; KK570EA; KK576EA; KK583ET; KK590ET; KK597ET; KK598ET; KK643EA; KK645EA; KK646EA; KK649ET; KK650ET; KK651ET; KK652ET; KK691ET; KK692ET; NZ258PA; NZ964LA; NZ965LA; NZ966LA; NZ968LA; NZ969LA; SG638UC; SH503UP; SH717UP; VD087UC; VL920AW; VL921AW; VL922AW; WD059AV; WF549AW; WZ971AW; XN057AW
Notes de configuration importantes
- MODULES MAY BE INSTALLED ONE AT A TIME; however, for optimum performance install modules across all three memory channels for triple channel memory interleaving.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation).
- A 64-bit operating system is required to utilize more than 4GB of memory.
- Kingston's DDR3-1333 modules automatically clock down to 1066MHz and 800MHz depending on which Intel Xeon model is used and the number of modules installed.
- Registered DIMMs on Z600 requires a systemboard with the C2 revision of the Intel 5520 chipset
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.
- This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
Mises à niveau compatibles pour votre système
- SSD
-
Référence produit : SKC600/1024G
- Référence produit : SKC600/1024G
- Comprend le logiciel de clonage Acronis
- SATA Rev 3,0
- Chiffrement XTS-AES 256 bits, TCG Opal 2.0, eDrive
- Technologie 3D TLC NAND
- Jusqu'à 550Mo/s en lecture, 520Mo/s en écriture.
- En savoir plus
-
Référence produit : SA400S37/240G
- Référence produit : SA400S37/240G
- SATA Rev 3.0
- 500Mo/s en lecture, 350Mo/s en écriture
- Comprend le logiciel de clonage Acronis
- En savoir plus
-
Référence produit : SQ500S37/240G
- Référence produit : SQ500S37/240G
- SATA Rev 3.0
- 500Mo/s en lecture, 350Mo/s en écriture
- Comprend le logiciel de clonage Acronis
- En savoir plus