HP/HPE - ProLiant DL380 Gen10 (G10) / SimpliVity 380 Gen10

Standard

8 GB (Removable)
Maximum

1,5 TB Reg ECC RDIMMs

3 TB LRDIMMs

Mises à niveau des mémoires compatibles

8GB Standard:

Processor 1 (installed):

8 Go

Processor 2 (optional):

Architecture du bus

USB 2.0/3.x Type-A

SSD - SATA 2.5-inch 9.5mm

SSD - SATA 3.5-inch

SSD - M.2 SATA

Mises à niveau du stockage compatible

12 Socket(s) per CPU

24 Socket(s) using two CPUs

Intel Xeon Scalable 1st/2nd Gen Intel C62x Series

826564-xxx; 826565-xxx; 826566-xxx; 826567-xxx; 868703-xxx; 868704-xxx; 868705-xxx; 868706-xxx; 868709-xxx; 868710-xxx; 875764-xxx; 875782-xxx; 875783-xxx; 875784-xxx; 875785-xxx; 879938-xxx; P02465-xxx

Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.

If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
* Some Intel Xeon processor models limit the amount of usable memory.