MSI - Z790MPOWER Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Massimo

    96 GB (w/current Kingston 48GB DIMMs)

Upgrade con memorie compatibili

  • Architettura bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2280 (Heat Sink)

Upgrade con storage compatibili

  • 2 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel Z790

    Intel Core i5 12th/13th/14th Gen Intel Z790

    Intel Core i7 12th/13th/14th Gen Intel Z790

    Intel Core i9 12th/13th/14th Gen Intel Z790

Note importanti sulla configurazione

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Intel 12th Gen processors support up to 4800MT/s DDR5 using standard JEDEC spec (ValueRAM) memory (non-XMP). Intel 13th Gen processors natively support up to 5600MT/s DDR5 using 1R (Single Rank) standard JEDEC spec (ValueRAM) memory (non-XMP). 2R (Dual Rank) modules may be forced to operate at slower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • Performance may increase with BIOS updates.

Note di configurazione per Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Performance may increase with BIOS updates.
  • Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
  • Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
  • This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

Upgrade compatibili per i vostri sistemi

Risultati
Capacità totale (Kit)
Capacità modulo
Tipo rank
DRAM Width
Densità DRAM
Filtro Filters Applied

Kingston FURY Renegade con dissipatore (SFYRSK/xxxG, SFYRDK/xxxG) è installabile nella maggior parte dei sistemi che ne supportano le dimensioni (~80mm x 23.67mm x 10.5mm). Parliamo di un'ampia gamma di schede madri, PC desktop e gaming PC, oltre alla console PlayStation 5. In caso di dubbi, consultare il manuale fornito dal produttore del sistema o contattare il supporto tecnico Kingston.
Nota: alcuni sistemi particolarmente compatti, come Intel® NUC, non possono fisicamente ospitare l'altezza del dissipatore. In questi casi, consigliamo di adottare FURY Renegade senza dissipatore (SFYRS/xxxG, SFYRD/xxxG).

Risultati
Gamma di capacità
Formato
Interfaccia
Filtro Filters Applied
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.