HP/HPE - ProLiant DL320 G6
![configurator results memory](https://media.kingston.com/kingston/headers/ktc-configurator-results-memory-md.jpg)
-
Standard
4 GB (Removable)
-
Massimo
24 GB ECC UDIMM
144 GB Reg ECC RDIMM with Single & Dual rank DIMMs
192 GB Reg ECC RDIMM with quad rank DIMMs
-
CPU 1:
-
Architettura bus
PCI
USB 2.0/3.x Type-A
PCI-X
PCI Express
SSD - SATA 3.5-inch
-
9 Socket(s)
-
Intel Xeon 5500 Series Intel 5500
Intel Xeon 3500 Series Intel 5500
Intel Xeon 5600 Series Intel 5500
470065-184; 470065-257; 505682-421; 505682-xx1; 505683-421; 505683-xx1; 505684-421; 505684-xx1; 514206-B21; 515739-B21; 519841-425; 593493-421; 593498-421; 593499-421; AY488A
Note importanti sulla configurazione
- Kingston offers "K3" kit part numbers for Triple Channel mode.
- Kingston's DDR3-1333 or higher speed modules automatically clock down to 1066MHz and 800MHz depending on which Intel Xeon model is used and the number of modules installed.
- This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
- Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO Triple Channel banks per processor on Intel Xeon 55xx series systems.
- Due to chipset limitations, Kingston's DDR3 Quad Rank memory will operate at 1066MHz in the first Triple Channel bank. Adding Quad Rank modules in the second Triple Channel bank will operate at 800MHz. The third memory bank must be unpopulated (2 DIMMs per channel, 6 sockets max).
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.
- As per HP ProLiant DL320 G6 and ML330 G6 Servers - Intel Xeon 3500-Series Processors Do Not Support Registered DIMMs (RDIMMs). Use only ECC Unbuffered memory with Xeon 3500 Series Processors.
- Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
Upgrade compatibili per i vostri sistemi
- Drive allo stato solido
Filtro
Filters
Applied
-
Numero di parte: SEDC600M/1920G
- Progettata appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenze e IOPS costanti e uniformi e QoS altamente affidabili
- Include Software di clonazione Acronis
- Fino a 560MB/s in lettura e 530MB/s in scrittura
- Numero di parte: SEDC600M/1920G
- Ulteriori informazioni
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.