HP/HPE - ProLiant BL680c G7 (Xeon E7)
-
Standard
16 GB (Removable)
32 GB (Removable)
-
Massimo
2 TB on Xeon E7
-
16GB Standard:
CPU 1 (installed)
4 GB4 GB -
CPU 2 (installed)
4 GB4 GB -
CPU 3 (optional)
-
CPU 4 (optional)
-
32GB Standard:
CPU 1 (installed)
4 GB4 GB -
CPU 2 (installed)
4 GB4 GB -
CPU 3 (installed)
4 GB4 GB -
CPU 4 (installed)
4 GB4 GB
-
Architettura bus
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
-
16 Socket(s) per Each Processor
64 Socket(s) Total
-
Intel Xeon E7-4800 Series Intel 7500
589045-B21; 589046-B21; 589047-B21; 600334-B21
Note importanti sulla configurazione
- VERIFY XEON PROCESSOR
- MODEL BEFORE ORDERING
- XEON 7500 SERIES
- NO LONGER SUPPORTED
- Low Voltage 1.35V PC3L DIMMs are only supported with Xeon E7 series processors and E7 Memory Cartridge, HP p/n 644172-B21. 32GB DIMMs require Xeon E7 series processors.
- Xeon E7 series processors and E7 Memory Cartridge support high density quad-rank 32GB, dual-rank 16GB and low density quad-rank 16GB RDIMMs. Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS in each Memory Cartridge.
- DIMM pairs MUST be populated in sequence by letter designation. Install DIMM pair in 1A & 8A first, followed by DIMM pair 3B & 6B, then DIMM pair 2C & 7C and DIMM pair 4D & 5D last.
- Maximum performance is achieved by balancing DIMM pairs by letter groupings across all Memory Cartridges. Such that the 1A, 8A pair is installed in all Memory Cartridges first, followed by the B pair, C pair and D pair.
Upgrade compatibili per i vostri sistemi
- Drive allo stato solido
Filtro
Filters
Applied
-
Numero di parte: SEDC600M/1920G
- Numero di parte: SEDC600M/1920G
- Progettata appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenze e IOPS costanti e uniformi e QoS altamente affidabili
- Include Software di clonazione Acronis
- Fino a 560MB/s in lettura e 530MB/s in scrittura
- Ulteriori informazioni
-
Numero di parte: SEDC600ME/1920G
- Numero di parte: SEDC600ME/1920G
- Progettato appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenza ridotta e IOPS costanti
- Include Acronis cloning software
- Crittografia AES 256-bit, TCG Opal 2.0
- 560MB/s in lettura, 530MB/s in scrittura
- Ulteriori informazioni
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.