Fujitsu - PRIMERGY RX350 S8 (D2949)

configurator results memory

  • Standard

    2 GB (Removable)

  • Massimo

    64 GB ECC UDIMMs

    512 GB Reg ECC RDIMMs

    768 GB LRDIMMs

  • CPU 1:

    2 GB

  • CPU 2:

  • Architettura bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

Upgrade con storage compatibili

  • 12 Socket(s) per CPU

    24 Socket(s) using two CPUs

  • Intel Xeon E5-2600 v2 Series Intel C600 Series

Note importanti sulla configurazione

  • DDR3 modules automatically clock down depending on which Intel Xeon processor is used and the number of modules installed.
  • Due to chipset limitations, Quad Rank memory will operate at 1066MHz in the first bank. Adding Quad Rank modules in the second bank will operate at 800MHz. The third memory bank must be unpopulated.
  • Due to chipset limitations, Unbuffered ECC DIMMs are limited to TWO banks per processor.
  • This system supports either Registered ECC or Unbuffered ECC memory. Mixing Registered ECC and Unbuffered ECC modules is not supported within this system.
  • 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.

Upgrade compatibili per i vostri sistemi

Risultati
Gamma di capacità
Formato
Interfaccia
Filtro Filters Applied
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.