Kami melihat Anda sedang mengunjungi situs Inggris. Apakah Anda ingin mengunjungi situs utama kami?

ASRock - W790 WS Motherboard

configurator results memory

  • Standar

    0 GB (Removable)

  • Maksimum

    512 GB (w/current Kingston 64GB RDIMMs)

  • Arsitektur Bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

Catatan Konfigurasi Penting

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
  • Mixing x4 and x8 modules is allowed, however not within the same Quad Channel bank group.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • Per ASRock, S3 sleep mode is only supported with 1, 2, and 4 DIMM populations.

Catatan Konfigurasi Kingston FURY

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

Upgrade yang Kompatibel untuk Sistem Anda

Overclocking mendorong spesifikasi standar industri yang stabil pada memori (kecepatan, latensi, voltase) untuk mencapai performa lebih baik. Meskipun secara umum aman serta didukung oleh Intel, AMD, dan produsen motherboard/sistem, risiko overclocking menjadi tanggung jawab Anda sepenuhnya. Stabilitas sistem dapat terganggu oleh adanya penambahan kecepatan dan konfigurasi. Komponen FURY yang tercantum didasarkan pada pengujian produsen motherboard (QVL) dan pengujian internal Kingston. Meskipun demikian, beberapa sistem mungkin memerlukan komponen premium (model prosesor, motherboard, catu daya, dan pendinginan air kelas atas) guna mencapai overclocking yang stabil, terutama untuk kecepatan yang tinggi.