Fujitsu - PRIMERGY TX1320 M4 (D3673)

configurator results memory

Standar

8 GB (Removable)

16 GB (Removable)
Maksimum

128 GB

Upgrade Memori yang Kompatibel

8GB Standard:

4 GB

4 GB

16GB Standard:

8 GB

8 GB

Arsitektur Bus

USB 2.0/3.x Type-A

PCI Express

SSD - SATA 2.5-inch 9.5mm

SSD - SATA 3.5-inch

SSD - U.2 NVMe

Upgrade Penyimpanan yang Kompatibel

4 Socket(s)

Intel Celeron G4900 Intel C24x Series

Intel Core i3 8100/9100 Intel C24x Series

Intel Pentium G5400/G5420 Intel C24x Series

Intel Xeon E-2100/E-2200 Series Intel C24x Series

Only Intel Xeon x2xx Series and Intel Core i processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
Faster memory will clock down to run at optimal speed depending on processor model installed.

Depending on which processor you install, different memory modules are required. Intel Xeon series processors require ECC UDIMM. Intel Core i3, Pentium, and Celeron series processors can use either ECC or non-ECC UDIMM.
If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.

* Kit: garansi tidak berlaku dan pengembalian tidak diterima jika dijual atau digunakan secara terpisah.