ASUS - Z9 Server Board Z9PA-U8

-
Standard
0 GB (Removable)
-
Massimo
64 GB non-ECC UDIMM
64 GB ECC UDIMM
128 GB Reg ECC DIMM
256 GB LRDIMM
-
Architettura bus
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
-
8 Socket(s)
-
Intel Core i7 Extreme Edition 3960x Intel C600 Series
Intel Xeon E5-1600 Series Intel C600 Series
Intel Xeon E5-2600 Series Intel C600 Series
Note importanti sulla configurazione
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
- This system supports either Registered ECC (RDIMM), ECC Unbuffered (ECC UDIMM) or Load Reduced (LRDIMM) memory using Xeon E5 series processors. Mixing RDIMMs, ECC UDIMMs and LRDIMMs is not supported within this system.
- Non-ECC Unbuffered (UDIMM) memory is supported only with Core i7 3800/3900 series processors. System does not support RDIMM or LRDIMM when Core i7 processor is installed.
- The Intel E5-1600 only supports ECC UDIMMs and RDIMMs.
- Modules must be ordered and installed in PAIRS for Dual Channel mode, or in groups of FOUR for Quad Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode, and "K4" kit part numbers for Quad Channel mode.
Upgrade compatibili per i vostri sistemi
- ValueRAM
- Drive allo stato solido
Filtro
Filters
Applied
-
Numero di parte: KVR16LN11/4
- Numero di parte: KVR16LN11/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
- Scheda tecnica - PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
-
Numero di parte: KVR16N11/8
- Numero di parte: KVR16N11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
- Scheda tecnica - PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
Filtro
Filters
Applied
-
Numero di parte: SA400S37/240G
- Numero di parte: SA400S37/240G
- SATA Rev 3.0
- 500 MB/s in lettura, 350 MB/s in scrittura
- Include Software di clonazione Acronis
- Ulteriori informazioni
-
Numero di parte: SKC600/256G
- Numero di parte: SKC600/256G
- Include Software di clonazione Acronis
- SATA Rev 3.0
- Crittografia XTS-AES 256-bit, TCG Opal 2.0, eDrive
- Tecnologia TLC NAND 3D
- Fino a 550MB/s in lettura e 500MB/s in scrittura
- Ulteriori informazioni
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.