ASUS - Pro WS W790E-SAGE SE Motherboard

configurator results memory

標準

0 GB (Removable)
最大

2 TB Reg ECC RDIMMs (512GB w/current Kingston parts)

記憶體相容升級

匯流排架構

USB 2.0/3.x Type-A

SSD - SATA 2.5-inch 9.5mm

USB 2.0/3.x Type-C

SSD M.2 NVME 2242 (double-sided)

SSD M.2 NVME 2260 (double-sided)

SSD M.2 NVME 22110 (double-sided)

SSD M.2 NVME 2280 (Heat Sink)

儲存空間相容升級

8 Socket(s)

Intel Xeon W-3400/W-3500 Series Intel W790

Intel Xeon W-2400/W-2500 Series Intel W790

MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF EIGHT for Octal Channel mode. Octal Channel mode is only supported on Xeon W-3400 series processors.
When using Xeon W-2400 series processors, memory sockets C1 D1 G1 H1 are disabled. Xeon W-2400 models support Quad Channel configurations only.
Mixing x4 and x8 modules is not allowed.

JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in Octal Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor limitations, Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
Refer to motherboard manual and QVL for supported memory configurations and speeds.

FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
Check with your motherboard QVL for the latest tested memory parts and supported configurations.

Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

* 套件：如果分開銷售或單獨使用，則保固失效且不接受退貨。