Chúng tôi nhận thấy bạn hiện đang truy cập trang web của Vương quốc Anh. Thay vào đó, bạn có muốn truy cập trang web chính của chúng tôi không?

ASUS - Pro WS W790E-SAGE SE Motherboard

configurator results memory

  • tiêu chuẩn

    0 GB (Removable)

  • Tối đa

    2 TB Reg ECC RDIMMs (512GB w/current Kingston parts)

  • Thông số Bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-3500 Series Intel W790

    Intel Xeon W-2400/W-2500 Series Intel W790

Lưu ý cấu hình quan trọng

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF EIGHT for Octal Channel mode. Octal Channel mode is only supported on Xeon W-3400 series processors.
  • When using Xeon W-2400 series processors, memory sockets C1 D1 G1 H1 are disabled. Xeon W-2400 models support Quad Channel configurations only.
  • Mixing x4 and x8 modules is not allowed.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in Octal Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor limitations, Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.

Ghi chú cấu hình Kingston FURY

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

Nâng cấp tương thích cho hệ thống của bạn

Hoạt động ép xung làm tăng mức độ ổn định của bộ nhớ theo các thông số kỹ thuật tiêu chuẩn trong ngành (tốc độ, độ trễ, điện áp) để đạt được hiệu suất cao hơn. Thường thì hoạt động này an toàn. Intel, AMD và các nhà sản xuất hệ thống/bo mạch chủ cũng hỗ trợ hoạt động này. Tuy nhiên, bạn tự chịu rủi ro của việc ép xung. Tính ổn định của hệ thống có thể bị tổn hại do tốc độ và cấu hình. Các cấu phần FURY được nêu là dựa trên thử nghiệm của nhà sản xuất bo mạch chủ (QVL) và thử nghiệm nội bộ của Kingston. Tuy nhiên, một số hệ thống có thể đòi hỏi các linh kệ cao cấp (mẫu bộ xử lý, bo mạch chủ, bộ nguồn và tản nhiệt nước phiên bản cao cấp) để ép xung ổn định, đặc biệt là khi ở tốc độ cực cao.