ASUS - Pro WS W680-ACE Motherboard

configurator results memory

  • tiêu chuẩn

    0 MB (Removable)

  • Tối đa

    192 GB

  • Thông số Bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel W680

    Intel Core i5 12th/13th/14th Gen Intel W680

    Intel Core i7 12th/13th/14th Gen Intel W680

    Intel Core i9 12th/13th/14th Gen Intel W680

Lưu ý cấu hình quan trọng

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
  • A BIOS update and/or configuration restrictions may be required to use 48GB memory modules featuring 24Gbit DRAM. Please refer to manual for additional information.

Ghi chú cấu hình Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
  • Performance may increase with BIOS updates.

Nâng cấp tương thích cho hệ thống của bạn

Hoạt động ép xung làm tăng mức độ ổn định của bộ nhớ theo các thông số kỹ thuật tiêu chuẩn trong ngành (tốc độ, độ trễ, điện áp) để đạt được hiệu suất cao hơn. Thường thì hoạt động này an toàn. Intel, AMD và các nhà sản xuất hệ thống/bo mạch chủ cũng hỗ trợ hoạt động này. Tuy nhiên, bạn tự chịu rủi ro của việc ép xung. Tính ổn định của hệ thống có thể bị tổn hại do tốc độ và cấu hình. Các cấu phần FURY được nêu là dựa trên thử nghiệm của nhà sản xuất bo mạch chủ (QVL) và thử nghiệm nội bộ của Kingston. Tuy nhiên, một số hệ thống có thể đòi hỏi các linh kệ cao cấp (mẫu bộ xử lý, bo mạch chủ, bộ nguồn và tản nhiệt nước phiên bản cao cấp) để ép xung ổn định, đặc biệt là khi ở tốc độ cực cao.