ASUS - Pro WS W680-ACE Motherboard

configurator results memory

  • Standard

    0 MB (Removable)

  • Maximum

    192 GB

Mises à niveau des mémoires compatibles

  • Architecture du bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Mises à niveau du stockage compatible

  • 4 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel W680

    Intel Core i5 12th/13th/14th Gen Intel W680

    Intel Core i7 12th/13th/14th Gen Intel W680

    Intel Core i9 12th/13th/14th Gen Intel W680

Notes de configuration importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
  • A BIOS update and/or configuration restrictions may be required to use 48GB memory modules featuring 24Gbit DRAM. Please refer to manual for additional information.

Notes de configuration Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
  • Performance may increase with BIOS updates.

Mises à niveau compatibles pour votre système

L’overclocking repousse les spécifications stables de la mémoire (vitesse, latences, tensions) pour offrir une performance supérieure. Bien que l’overclocking soit considéré en général comme une opération sûre et prise en charge par Intel, AMD et d’autres fabricants de cartes mères et de systèmes, n'oubliez pas que vous le réalisez à vos propres risques. Certaines vitesses et configurations peuvent compromettre la stabilité du système. Les composants FURY mentionnés reposent sur les essais du fabricant de la carte mère (QVL) et les essais internes de Kingston. Toutefois, certains systèmes pourraient nécessiter des composants haut de gamme (modèles de processeurs, de cartes mères, de modules d’alimentation et de refroidissement à l’eau haut de gamme) afin d’obtenir un overclocking stable, surtout aux vitesses extrêmes.

Résultats
Vitesse{{Footnote.A65242}}
Capacité totale (kit)
Capacité
Classement
DRAM Width
Densité DRAM
Tension
Kit
Filtrer Filters Applied
Résultats
Vitesse{{Footnote.A65242}}
Capacité totale (kit)
Capacité
Classement
DRAM Width
Densité DRAM
Filtrer Filters Applied
Résultats
Capacité
Classement
Filtrer Filters Applied
Résultats
Capacités
Filtrer Filters Applied
* Kits: La garantie sera invalidée et les retours refusés si les kits sont vendus ou utilisés séparément.