Biostar - A68N-2100K 2.0 Motherboard
![configurator results memory](https://media.kingston.com/kingston/headers/ktc-configurator-results-memory-md.jpg)
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
-
2 Socket(s)
-
AMD A-Series APU
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- This system supports both Low Voltage (1.35V) and Standard Voltage (1.5V) memory. For power savings, install only Low Voltage memory. If mixed with Standard Voltage, Low Voltage memory will default to 1.5V.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
- Please refer to the system manual for proper installation of DIMMs for Single Channel and Dual Channel configurations.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KVR16LN11/4
- Part Number: KVR16LN11/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16LN11/8
- Part Number: KVR16LN11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.35V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.35V 240-pin 4Gbit
-
Part Number: KVR16N11/8
- Part Number: KVR16N11/8
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 4Gbit
-
Part Number: KVR16N11S8/4
- Part Number: KVR16N11S8/4
- DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.5V 240-pin 4Gbit
- Spec Sheet PDF
DDR3 1600MT/s Non-ECC Unbuffered DIMM CL11 1RX8 1.5V 240-pin 4Gbit
Filter
Filters
Applied
-
Part Number: SKC600/1024G
- Part Number: SKC600/1024G
- Includes Acronis cloning software
- SATA Rev 3.0
- XTS-AES 256-bit Encryption, TCG Opal 2.0, eDrive
- 3D TLC NAND technology
- Up to 550MB/s Read, 520MB/s Write
- Learn more
-
Part Number: SA400S37/240G
- Part Number: SA400S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
-
Part Number: SQ500S37/240G
- Part Number: SQ500S37/240G
- SATA Rev 3.0
- 500MB/s read, 350MB/s write
- Includes Acronis cloning software
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.