ASRock - W790 WS Motherboard

configurator results memory

  • estándar

    0 GB (Removable)

  • Máximo

    512 GB (w/current Kingston 64GB RDIMMs)

Actualizaciones de memoria compatibles

  • Arquitectura de bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Actualizaciones de Almacenamiento compatibles

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

Notas de configuración importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
  • Mixing x4 and x8 modules is allowed, however not within the same Quad Channel bank group.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • Per ASRock, S3 sleep mode is only supported with 1, 2, and 4 DIMM populations.

Notas de configuración de Kingston FURY

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

Actualizaciones compatibles para su sistema

El Overclocking presiona las especificaciones de memoria estándar estables de la industria (velocidad, latencias, voltaje) para lograr un mayor rendimiento. Aunque generalmente es seguro y cuenta con el respaldo de Intel, AMD y los fabricantes de placas madre/sistemas, el Overclocking se realiza bajo su propio riesgo. La estabilidad del sistema puede verse comprometida por algunas velocidades y configuraciones. Las piezas FURY enumeradas se basan en las pruebas del fabricante de la placa madre (QVL) y las pruebas internas de Kingston. Sin embargo, algunos sistemas pueden requerir componentes premium (modelos de procesadores de gama alta, placas madre, fuentes de alimentación y enfriamiento por agua) para lograr un Overclocking estable, especialmente a velocidades extremas.

Resultados
Velocidad{{Footnote.A65242}}
Capacidad total (kit)
Capacidad del módulo
Clasificación
DRAM Width
Tipo de perfil
Voltaje
Kit
Filtrar Filters Applied
Resultados
Velocidad{{Footnote.A65242}}
Capacidad del módulo
Clasificación
DRAM Width
Densidad de DRAM
Filtrar Filters Applied
Resultados
Rango de capacidad
Factor de Forma
Interfaz
Filtrar Filters Applied
* Kits: la garantía quedará anulada y no se aceptarán devoluciones si las unidades dentro del kit se venden o usan de forma independiente.