ASRock - B560M Pro4/ac+ Motherboard

configurator results memory

  • estándar

    0 GB (Removable)

  • Máximo

    128 GB

Actualizaciones de memoria compatibles

  • Arquitectura de bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    PCIe 4.0

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

Actualizaciones de Almacenamiento compatibles

  • 4 Socket(s)

  • Intel Core i3 10th/11th Gen Intel B560

    Intel Core i5 10th/11th Gen Intel B560

    Intel Core i7 10th/11th Gen Intel B560

    Intel Core i9 10th/11th Gen Intel B560

Notas de configuración importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.

Notas de configuración de Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Performance may increase with BIOS updates.
  • Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
  • Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
  • This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

Actualizaciones compatibles para su sistema

Resultados
Velocidad{{Footnote.A65242}}
Factor de forma
Capacidad total (kit)
Capacidad del módulo
Clasificación
DRAM Width
Densidad de DRAM
Filtrar Filters Applied

Kingston FURY Renegade con disipador de calor (SFYRSK/xxxG, SFYRDK/xxxG) encajará en la mayoría de los sistemas que puedan adaptarse a su tamaño (~80mm x 23.67mm x 10.5mm). Esto incluye una variedad de placas base, computadoras de escritorio, PCs para juegos y PlayStation 5. Si no está seguro de si encajará, consulte el manual de soporte del fabricante de su sistema o comuníquese con el soporte técnico de Kingston.
Nota: Algunos sistemas de factor de forma pequeño como Intel® NUC no pueden adaptarse físicamente a la altura del disipador de calor. En estas circunstancias, sugerimos FURY Renegade sin disipador de calor (SFYRS/xxxG, SFYRD/xxxG).

Resultados
Rango de capacidad
Factor de Forma
Interfaz
Filtrar Filters Applied
* Kits: la garantía quedará anulada y no se aceptarán devoluciones si las unidades dentro del kit se venden o usan de forma independiente.