ASUS - Pro WS W680M-ACE SE Motherboard
-
匯流排架構
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD M.2 NVME 2242 (double-sided)
SSD M.2 NVME 2260 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
4 Socket(s)
-
Intel Core i3 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i5 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i7 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i9 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
重要的組態注意事項
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
- This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
Kingston FURY 組態注意事項
- FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
- Check with your motherboard QVL for the latest tested memory parts and supported configurations.
- Mixing modules of different speeds/timings/voltages is not recommended and may cause instability.
- A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
- If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
- Performance may increase with BIOS updates.
專為個人系統升級
- Kingston FURY Memory
- ValueRAM
- Server Premier
- 固態硬碟
超頻是將記憶體自穩定的產業標準規格 (速度、延遲、電壓) 向上提升,進而達到更高的效能。一般而言十分安全,並且得到 Intel、AMD 和主機板/系統製造商的支援,但超頻的風險仍由您自行承擔。某些速度和配置可能會影響系統穩定性。所列之 FURY 產品是根據主機板製造商測試 (QVL) 和 Kingston 內部測試而定,但某些系統可能需要頂級零組件 (高階處理器型號、主機板、電源和水冷系統) 才能達到穩定的超頻 (尤其是超頻至極限速度時)。
備專用散熱片的Kingston FURY Renegade (SFYRSK/xxxG, SFYRDK/xxxG)適用於大多數可容納(~80mm x 23.67mm x 10.5mm)尺寸的系統。其中包括各種主機板、桌上型電腦、電競電腦和 PlayStation 5。如果您不確定是否適合,請查看系統製造商支持手冊,或聯絡 Kingston 技術支援團隊。 注意:Intel® NUC 等部分小型電腦系統在實體上無法容納散熱片的高度。在該等情況下,我們建議使用未隨附專用散熱片的FURY Renegade (SFYRS/xxxG, SFYRD/xxxG) 。
-
產品型號: SEDC600M/1920G
- 產品型號: SEDC600M/1920G
- 專為資料中心設計
- 主機板內建斷電保護 (PLP)
- 一致的延遲與 IOPS,可靠的 QoS
- 隨附Acronis 備份軟體
- 高達 560MB/s 讀取速度,530MB/s 寫入速度
- 瞭解更多
-
產品型號: SEDC600ME/1920G
- 產品型號: SEDC600ME/1920G
- 專為資料中心環境設計
- 主機板內建斷電保護 (PLP)
- 低延遲和可預測的 IO
- 隨附 Acronis cloning software
- TCG Opal 2.0、AES 256-bit 加密
- 560MB/s 讀取速度、530MB/s 寫入速度
- 瞭解更多