ASUS - Pro WS W680M-ACE SE Motherboard
-
总线架构
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD M.2 NVME 2242 (double-sided)
SSD M.2 NVME 2260 (double-sided)
SSD M.2 NVME 2280 (Heat Sink)
-
4 Socket(s)
-
Intel Core i3 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i5 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i7 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
Intel Core i9 12th/13th/14th Gen and Pentium Gold and Celeron Intel W680
重要配置说明
- MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
- Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
- This system supports ECC or non-ECC memory depending on which processor is installed. Mixing ECC and non-ECC modules is not recommended. Please refer to manual or CPU specifications for additional information.
Kingston FURY 配置说明
- FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
- Check with your motherboard QVL for the latest tested memory parts and supported configurations.
- Mixing modules of different speeds/timings/voltages is not recommended and may cause instability.
- A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
- If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
- Performance may increase with BIOS updates.
适用于您的系统的兼容升级产品
- Kingston FURY Memory
- ValueRAM
- Server Premier
- 固态硬盘
超频通过超越行业标准内存规格(速度、延迟、电压)实现更高性能。尽管超频通常是安全的并得到 Intel、AMD 和主板/系统制造商的支持,但超频风险自负。系统稳定性可能会受到部分速度和配置的负面影响。列出的 FURY 部件依据的是主板制造商测试 (QVL) 和金士顿内部测试,不过,部分系统可能需要高品质组件(高端的处理器型号、主板、电源和水冷散热)才能实现稳定的超频,尤其是对于极快运行速度而言。
带散热器(SFYRSK/xxxG, SFYRDK/xxxG)的金士顿FURY Renegade适合能容纳其尺寸 (~80mm x 23.67mm x 10.5mm)的大多数系统。这包括各种主板、台式机、游戏 PC 及 PlayStation 5。如果您不确定它是否适合,请查阅系统制造商的支持手册,或者联系金士顿技术支持。 注意:一些小型系统如Intel® NUC在物理上无法容纳散热器的高度。在这种情况下,建议使用不带散热器(SFYRS/xxxG, SFYRD/xxxG)的FURY Renegade。
-
产品型号: SEDC600M/1920G
- 产品型号: SEDC600M/1920G
- 专为数据中心环境而设计
- 板载断电保护 (PLP)
- 一致的延迟和 IOPS,可靠的 QoS
- 包括 Acronis 克隆软件
- 读取速度高达 560MB/s,写入速度高达 530MB/s
- 阅读更多信息
-
产品型号: SEDC600ME/1920G
- 产品型号: SEDC600ME/1920G
- 专为数据中心环境而设计
- 板载断电保护 (PLP)
- 低延迟和可预测的 IO
- 包括 Acronis cloning software
- TCG Opal 2.0,AES 256-bit 加密
- 560MB/秒读取速度、530MB/秒写入速度
- 阅读更多信息