DDR4 Memory Standard

DDR4 Overview

DDR4 RAM: an Introduction to the latest DRAM Memory Technology

With DDR3 reaching its limits in a world that demands higher performance and increased bandwidth, a new generation of DDR SDRAM has arrived. DDR4 delivers higher performance, higher DIMM capacities, improved data integrity and lower power consumption.

Achieving more than 2Gbps per pin and consuming less power than DDR3L (DDR3 Low Voltage), DDR4 provides up to 50 percent increased performance and bandwidth while decreasing the power consumption of your overall computing environment. This represents a significant improvement over previous memory technologies and a power savings up to 40 percent

In addition to optimized performance and greener, low-cost computing, DDR4 also provides cyclic redundancy checks (CRC) for improved data reliability, on-chip parity detection for integrity verification of ‘command and address’ transfers over a link, enhanced signal integrity and other robust RAS features.

Technology At A Glance

DDR4 Details

Please note that there are subtle differences between DDR3 and DDR4 modules.

DDR4 - Key notch difference

Key notch difference

The key notch on a DDR4 module is in a different location from the key notch on a DDR3 module. Both notches are located on the insertion edge but the notch location on the DDR4 is slightly different, to prevent it the module from being installed into an incompatible board or platform.

DDR4 - Increased thickness

Increased thickness

DDR4 modules are slightly thicker than DDR3, to accommodate more signal layers.

DDR4 - Curved edge

Curved edge

DDR4 modules feature a curved edge to help with insertion and alleviate stress on the PCB during memory installation.

Fitur Fisik

Sekilas modul DDR4 tidak terlihat berbeda, tetapi terdapat beberapa perbedaan. RAM DDR4 tidak kompatibel dengan motherboard DDR3 dan sebaliknya. Lekukannya telah dipindahkan untuk menghindari dimasukannya jenis memori yang salah secara tidak sengaja. Bukan 240 pin. Setiap modul memiliki 288 pin. Untuk meningkatkan kekuatan dan kontak kelistrikan, terdapat sedikit lekukan pada bentuk bagian bawah PCB.

Kecepatan Lebih Tinggi

Dalam hal perbedaan teknologi, DDR4 memiliki kecepatan yang lebih tinggi, mulai dari 2133 MHz, yang merupakan DDR3 kelas atas. Peningkatan kecepatan yang diharapkan dapat lebih dari 3200 MHz.

Konsumsi Daya Lebih Kecil

DDR4 lebih efisien daripada DDR3, mengonsumsi daya 40% lebih rendah dan hanya membutuhkan 1,2 V per modul. Ini merupakan keuntungan besar untuk notebook karena membuat masa pakai baterai menjadi lebih lama.

Peningkatan Kapasitas

DDR4 mendukung chip dengan kerapatan yang lebih tinggi dan teknologi stacking yang memungkinkan modul memori tunggal dengan kapasitas hingga 512 GB.

Lebih Andal

Dengan cyclic redundancy check yang ditingkatkan, deteksi paritas on-chip dari transfer "command and address" dan peningkatan integritas sinyal, DDR4 menjadi DDR yang paling andal saat ini.

Specifications at a Glance

Description	DDR3	DDR4	Advantage
Chip Densities	512Mb-8Gb	4Gb-16Gb	Larger DIMM Capacities
Data Rates	800Mb/s – 2133Mb/s	1600Mb/s – 3200Mb/s	Migration to Higher-Speed I/O
Voltage	1,5V	1,2V	Reduced Memory Power Demand
Low Voltage Standard	Yes (DDR3L at 1.35V)	Anticipated at 1.05V	Memory Power Reductions
Internal Banks	8	16	More Banks
Bank Groups (BG)	0	4	Faster Burst Accesses
VREF inputs	2 – DQs and CMD/ADDR	1 – CMD/ADDR	VREFDQ Now Internal
tCK – DLL Enabled	300MHz – 800MHz	667MHz – 1,6GHz	Higher Data Rates
tCK – DLL Disabled	10MHz – 125MHz (optional)	Undefined to 125MHz	DLL-off now fully supported
Read Latency	AL + CL	AL + CL	Expanded Values
Write Latency	AL + CWL	AL + CWL	Expanded Values
DQ Driver (ALT)	40 Ω	48 Ω	Optimal for PtP Applications
DQ Bus	SSTL15	POD12	Less I/O Noise and Power
RTT Values (in Ω)	120, 60, 40, 30, 20	240, 120, 80, 60, 48, 40, 34	Support for Higher Data Rates
RTT Not Allowed	READ Bursts	Disables during Read Bursts	Ease-of-Use
ODT Modes	Nominal, Dynamic	Nominal, Dynamic, Park	Add’l Control Mode; OTF Value Change
ODT Control	ODT Signaling Required	ODT Signaling NOT Required	Ease of ODT Control; Allows Non-ODT Routing, PtP Apps
Multi-Purpose Register	Four Registers – 1 Defined, 3 RFU	Four Registers – 3 Defined, 1 RFU	Provides Additional Specialty Readout
DIMM Types	RDIMM, LRDIMM, UDIMM, SODIMM	RDIMM, LRDIMM, UDIMM, SODIMM
DIMM Pins	240 (R, LR, U); 204 (SODIMM)	288 (R, LR, U); 260 (SODIMM)
RAS	ECC	CRC, Parity, Addressability, GDM	More RAS features; improved data integrity