We notice you are currently visiting the UK site. Would you like to visit our main site instead?

Supermicro - X12DPi-N6 Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    4 TB ECC LRDIMMs (1TB w/current Kingston parts)

    4 TB ECC RDIMMs (1TB w/current Kingston parts)

  • CPU 1:

    DDR4
    PMem
  • CPU 2:

    DDR4
    PMem
  • Bus Architecture

    USB 2.0/3.x Type-A

    PCIe 4.0

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 1 Socket(s) PMem per CPU

    2 Socket(s) PMem using two CPUs

    8 Socket(s) per CPU

    16 Socket(s) using two CPUs

  • Intel Xeon 3rd Gen Scalable Intel C62xA Series

MBD-X12DPi-N6

Important Configuration Notes

  • Faster memory will clock down to run at optimal speed depending on processor model installed.
  • There are 18 DIMM sockets, however 2 sockets (P1-DIMMB2 / P2-DIMMB2) can ONLY be used for Intel Optane PMem.
  • Registered RDIMM and Load Reduced LRDIMM memory modules CANNOT be mixed within the same system.
  • Mixing x4 and x8 modules is allowed, however not within the same bank.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).