We notice you are currently visiting the UK site. Would you like to visit our main site instead?

ASRock - Server Board E3C246D4U2-2T

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - M.2 SATA

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Xeon E-2100/E-2200 Series Intel C24x Series

Important Configuration Notes

  • Only Intel Xeon E-x2xx Series processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
  • Faster memory will clock down to run at optimal speed depending on processor model installed.
  • This system supports both ECC and non-ECC memory. Mixing ECC and non-ECC modules is not recommended.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.

Compatible Upgrades For Your System

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).